.dsy:it. (http://www.dsy.it/forum/)
- Tech (http://www.dsy.it/forum/forumdisplay.php?forumid=189)
-- [WIRELESS] Ci sono quasi... (http://www.dsy.it/forum/showthread.php?threadid=19573)

[WIRELESS] Ci sono quasi...

Con la mia Debian Sid ho ancora un po' di casini..off.
Riassumendo:
- ndiswrapper dai repository debian, visto che gli acx100 non sono supportati da wpa_supplicant..
- wpa_supplicant 0.3.8, anch'esso dai repository debian
- config (copiato da qualcuno di voi) :

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1

network={
ssid="DSI-DICO"
scan_ssid=0
proto=WPA RSN
key_mgmt=WPA-EAP IEEE8021X NONE
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
eap=TTLS PEAP TLS
#anonymous_identity="anonymous"
#phase2="autheap=CHAP"
identity="xxx"
password="xxx"
}

Initializing interface 'wlan0' conf '/etc/wpa_dsi.conf' driver 'ndiswrapper'
Configuration file '/etc/wpa_dsi.conf' -> '/etc/wpa_dsi.conf'
Reading configuration file '/etc/wpa_dsi.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
Priority group 0
id=0 ssid='DSI-DICO'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:0d:88:b8:7a:38
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RX ctrl_iface - hexdump_ascii(len=6):
41 54 54 41 43 48 ATTACH
CTRL_IFACE monitor attached - hexdump(len=24): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 38 35 32 39 2d 33 30 00 00 00
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Scan timeout - try to get results
Received 2395 bytes of scan results (13 BSSes)
Scan results: 13
Selecting BSS from priority group 0
0: 00:0d:88:c1:b9:48 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
1: 00:0d:88:c1:a6:84 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
2: 00:0d:88:c1:aa:42 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
3: 00:0d:88:c1:b4:f8 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
4: 00:0d:88:c1:bc:8f ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
5: 00:0d:88:c1:a2:cd ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
6: 00:0d:88:c1:c0:15 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
7: 00:0d:88:c1:ba:43 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
8: 00:0d:88:c1:be:73 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
9: 00:0d:88:c1:b9:28 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
10: 00:0d:88:c1:a3:1c ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
skip - no WPA/RSN IE
11: 00:0d:88:c1:be:8e ssid='vpn' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
12: 00:0d:88:c1:a8:d9 ssid='vpn' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
skip - no WPA/RSN IE
No suitable AP found.

Initializing interface 'wlan0' conf '/etc/wpa_dsi.conf' driver 'ndiswrapper'
Configuration file '/etc/wpa_dsi.conf' -> '/etc/wpa_dsi.conf'
Reading configuration file '/etc/wpa_dsi.conf'
Priority group 0
id=0 ssid='DSI-DICO'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:0d:88:b8:7a:38
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 2210 bytes of scan results (12 BSSes)
Scan results: 12
Selecting BSS from priority group 0
0: 00:0d:88:c1:b9:48 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
1: 00:0d:88:c1:b4:f8 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
2: 00:0d:88:c1:a6:84 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
3: 00:0d:88:c1:aa:42 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
4: 00:0d:88:c1:c0:15 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
5: 00:0d:88:c1:bc:8f ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
6: 00:0d:88:c1:a2:cd ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
7: 00:0d:88:c1:a3:1c ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
8: 00:0d:88:c1:b9:28 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
9: 00:0d:88:c1:be:8e ssid='vpn' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
10: 00:0d:88:c1:a8:d9 ssid='vpn' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
11: 00:0d:88:c1:bd:97 ssid='DSI-DICO' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
selected non-WPA AP 00:0d:88:c1:b9:48 ssid='DSI-DICO'
Trying to associate with 00:0d:88:c1:b9:48 (SSID='DSI-DICO' freq=2412 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 13
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT 802.1X
WPA: Own WPA IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
No keys have been configured - skip key clearing

network={
ssid="DSI-DICO"
scan_ssid=0
proto=WPA RSN
key_mgmt=WPA-EAP IEEE8021X NONE
pairwise=CCMP TKIP
eap=TTLS PEAP TLS
group=CCMP TKIP WEP104 WEP40
identity="vostra_login_in_SiLAB"
password="password_della_vostra_registrazione_al_servizio"
}

__________________
Think indifferent!

Re: [WIRELESS] Ci sono quasi...

Originally posted by iesse
Un'ulteriore cosa carina è che wpa_cli con il wpa_su* compilato
non funziona perchè in /var/run/wpa_supplicant non c'è nessuna socket per comunicare (problema minore, sarà qualche parametro di compilazione),

EAPOL: SUPP_PAE entering state DISCONNECTED

__________________
~ get Debian! ~ get FreeBSD! ~ get OpenBSD! ~

Re: Re: [WIRELESS] Ci sono quasi...

Originally posted by DeepBlue

Per il resto il log parla da sé:

Hai inizializzato la scheda prima di lanciare WPA?
Hai controllato chei n /etc/rc.d/rc.wireless.conf ci sia una riga con scritto WPA=y ?

__________________
Think indifferent!

eh... hai ragione..

In sostanza /etc/rc.d/rc.wireless.conf è il file di configurazione di /etc/rc.d/rc.wireless, che è il file specifico per il wireless.

Sotto deb /etc/rc.d/rc.wireless corrisponde più o meno al file /etc/init.d/networking

Purtroppo non so aiutarti più di tanto. Hai provato a cambiare versione di ndiswrapper e/o di wpa?

__________________
~ get Debian! ~ get FreeBSD! ~ get OpenBSD! ~

Ce la farò anch'io un giorno?!

__________________
«And if you ever smell christian blood up in the mountains, then get your axe and chop them down!»

tu che problema hai ripe?

__________________
~ get Debian! ~ get FreeBSD! ~ get OpenBSD! ~

Originally posted by DeepBlue
eh... hai ragione..

In sostanza /etc/rc.d/rc.wireless.conf è il file di configurazione di /etc/rc.d/rc.wireless, che è il file specifico per il wireless.

Sotto deb /etc/rc.d/rc.wireless corrisponde più o meno al file /etc/init.d/networking

Purtroppo non so aiutarti più di tanto. Hai provato a cambiare versione di ndiswrapper e/o di wpa?

__________________
Think indifferent!

Originally posted by DeepBlue
tu che problema hai ripe?

__________________
«And if you ever smell christian blood up in the mountains, then get your axe and chop them down!»

Non sara' completo ed esauriente pero' e' un inizio....
http://wireless.silab.dsi.unimi.it/linux.html