Istruzioni:
Vediamo le offerte proposte:
Utilizzeremo i comandi contenuti nella cartella /proc:
code:
[root@localhost root]# cat /proc/
1/ 1854/ 8/ ide/ mtrr
12/ 1855/ 8979/ interrupts net/
1247/ 1856/ apm iomem partitions
1248/ 1857/ bus/ ioports pci
1704/ 2/ cmdline irq/ scsi/
1708/ 20666/ cpufreq kcore self@
1756/ 20668/ cpuinfo kmsg slabinfo
1765/ 20669/ crypto ksyms stat
1797/ 2641/ devices loadavg swaps
1810/ 3/ dma locks sys/
1846/ 4/ driver/ mdstat sysrq-trigger
1848/ 5/ execdomains meminfo sysvipc/
1850/ 6/ fb misc tty/
1851/ 67/ filesystems modules uptime
1852/ 7/ fs/ mounts@ version
[root@localhost root]#
Ecco informazioni sulla memoria:
code:
[root@localhost root]# cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 344592384 339165184 5427200 0 39493632 235360256
Swap: 542826496 26132480 516694016
MemTotal: 336516 kB
MemFree: 5300 kB
MemShared: 0 kB
Buffers: 38568 kB
Cached: 216516 kB
SwapCached: 13328 kB
Active: 60508 kB
Inactive: 214828 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 336516 kB
LowFree: 5300 kB
SwapTotal: 530104 kB
SwapFree: 504584 kB
[root@localhost root]#
Ecco informazioni sulla cpu:
code:
[root@localhost root]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 2
cpu MHz : 451.034
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 897.84
[root@localhost root]#
Ecco informazioni su input/output:
code:
[root@localhost root]# cat /proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-14ffcfff : System RAM
00100000-00277f10 : Kernel code
00277f11-0038d8a7 : Kernel data
14ffd000-14ffefff : ACPI Tables
14fff000-14ffffff : ACPI Non-volatile Storage
dd000000-dd00007f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
dd800000-dedfffff : PCI Bus #01
dd800000-ddffffff : Matrox Graphics, Inc. MGA 2164W [Millennium II] AGP
de000000-de003fff : Matrox Graphics, Inc. MGA 2164W [Millennium II] AGP
def00000-dfffffff : PCI Bus #01
df000000-dfffffff : Matrox Graphics, Inc. MGA 2164W [Millennium II] AGP
e0000000-e7ffffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
ffff0000-ffffffff : reserved
[root@localhost root]#
Ecco informazioni su input/output:
code:
[root@localhost root]# cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size= 256MB: write-back, count=1
reg01: base=0x10000000 ( 256MB), size= 64MB: write-back, count=1
reg02: base=0x14000000 ( 320MB), size= 16MB: write-back, count=1
[root@localhost root]#
Ecco informazioni sulle partizioni:
code:
[root@localhost root]# cat /proc/partitions
major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq
22 0 30018240 hdc 14246 168 114202 202300 869908 12750221 108961008 5896755 -7 25261143 1098765
22 1 30017421 hdc1 14233 117 114074 202170 869908 12750221 108961008 5896755 0 4073360 6098925
3 0 14943200 hda 1118029 12933989 112412346 15703220 1535589 3435499 39790696 42439530 -657 25257993 19954831
3 1 8225248 hda1 1117093 12929178 112370162 15672650 1534558 3430023 39738464 42383340 0 8080210 15122467
3 2 1 hda2 3 0 6 80 0 0 0 0 0 80 80
3 5 6144831 hda5 85 117 890 1420 83 29 872 12290 0 13710 13710
3 6 530113 hda6 772 4286 40320 27010 948 5447 51360 43900 0 48570 71180
[root@localhost root]#
Ecco informazioni sulle porte input/output:
code:
[root@localhost root]# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
b800-b81f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
b800-b81f : ne2k-pci
d000-d07f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
d000-d07f : 00:09.0
d400-d41f : Intel Corp. 82371AB/EB/MB PIIX4 USB
d400-d41f : usb-uhci
d800-d80f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
d800-d807 : ide0
d808-d80f : ide1
e400-e43f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
e800-e81f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
[root@localhost root]#
Ecco informazioni sui devices:
code:
[root@localhost root]# cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
13 input
29 fb
36 netlink
128 ptm
129 ptm
130 ptm
131 ptm
132 ptm
133 ptm
134 ptm
135 ptm
136 pts
137 pts
138 pts
139 pts
140 pts
141 pts
142 pts
143 pts
162 raw
180 usb
Block devices:
1 ramdisk
3 ide0
9 md
12 unnamed
14 unnamed
22 ide1
38 unnamed
39 unnamed
[root@localhost root]#
Ecco informazioni sulla versione:
code:
[root@localhost root]# cat /proc/version
Linux version 2.4.22-1.2115.nptl (bhcompile@daffy.perf.redhat.com)
(gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1
Wed Oct 29 15:42:51 EST 2003
[root@localhost root]#
[SHELL] - Info con "cat /proc "